Camshaft Housings and Camshafts
| Measuring Point | Installation Size with Tolerances |
Clearance (+) or Preload (-) |
Wear Limit | ||
| mm | from | to | mm | ||
| Camshaft bearings to camshaft | B | 46.967-46.992 | +0.025 | +0.066 | 0.10 |
| S | 46.926-46.942 | ||||
| Camshaft end play | +0.150 | +0.200 | 0.40 | ||
| Camshaft to sprocket wheel flange | B | 30.000-30.013 | 0.000 | +0.034 | |
| S | 20.979-30.000 | ||||
| Camsaft runout, measured at center journal (between points) | max 0.02 | ||||
| Rocker arm shaft to camshaft housing | B | 18.000-18.018 | Rocker arm shafts are firm by wedge effect of bolt | ||
| S | 17.992-18.000 | ||||
| Rocker arm to rocker arm shaft | B | 18.016-18.021 | +0.016 | +0.035 | 0.080 |
| S | 17.992-18.000 | ||||
|
end play |
+0.100 | +0.350 | 0.50 | ||