Connecting Rods
| Measuring Point | Installation Size with Tolerances |
Clearance (+) or Preload (-) |
Wear Limit | ||
| mm | from | to | mm | ||
| Big end bore diameter, without insert | 61.000-61.019 | ||||
| Connecting rod, width c | 21.8-21.7 | +0.200 | +0.400 | ||
| Bearing width at crankpin | 22.00-22.1 | ||||
| Small end diameter, bore to bushing | B | 25.000-25.021 | -0.014 | -0.055 | |
| S | 25.035-25.055 | ||||
| Connecting rod bushing to piston pin | B | 22.022-22.033 | +0.020 | +0.039 | 0.055 |
| 21.994-22.000 | |||||
 |
CAUTION The reinforced connecting rods can not
be used in |
||||
| A | Distance between centers | 130 mm |
| b | Piston poin bushing width | 26.0-0.2 mm |
| c | Big end width | 21.8-0.1 mm |
| D | Bid end diameter (without inserts) | 61.019-61.000 mm |
| E | Small end diameter | 25.021-25.000 mm |
| f | Diameter with piton pin busing removed | 25.035-25.055 mm |
| (Preload of bushing in connecting rod) | (0.014-0.055 mm) | |
| G | Diameter of installed piston pin bushing | 22.033-22.020 mm |
| Clearance, piston pin bushing to piston pin | 0.023-0.039 mm |